SubContractor Series

SC IWDVR In-wall Subwoofer



Out of stock

*Requires SC-1250 Amp and SC-IWBB Back Box.
SubContractor Series In-wall Cabinet/Driver; Black Pica.



SC-IW In-Wall Subwoofer

The SC-IW bass output is from 22 Hz to 120 Hz at 3dB down using a 4"x14" rectangular, patent pending T-shaped driver for use in new construction and retrofits within a standard 2x4 framed wall. The unique driver design fires vertically in your wall to minimize vibration while accurately reproducing the most demanding home theater and music.

The SC-IWDVR combines with the SC-IWBB Back Box to form a sealed 2-cabinet design, so that the driver may be protected during sheet rocking of new construction. You can use the included standard or designer grille to complete the flush wall mount installation.

If you are buying an SC-IW subwoofer, you must first install the SC-IWBB Back Box and also power it with an SC-1250 amplifier to reap the benefits of the model-specific EQ settings; no other amplifier includes these.


Additional Information

Length No
Accessories REQUIRES the SC-IW Back Box for installation (sold separately)
Amplifier N/A
Auto On/Off No
Cabinet Design Sealed enclosure
Color Black
Dimensions: (H/W/D) 28.4" x 14" x 3.4" (71.6 x 35.6 x 8.6 cm) *Not installed; excludes grilles, mounting brackets, etc. Enclosure (only): 19" x 14" x 3.375" (48 x 36 x 9.5 cm). Driver (only): 10.5" x 14" x 3.75" (27 x 36 x 9.5 cm)
Frequency Response (+/-3 dB) 22-120 Hz
HiPass Crossover N/A
LoPass Crossover N/A
Phase Control No
Removable Grille No
Shipping Weight 2 Cartons = Carton 1: 16 lbs. (7.25 Kg), Carton 2: 27 lbs. (12.25 Kg), Total: 43 lbs (19.5 Kg)
Size Large
Voice Coil 3" Dual Layer inner/outer wind
Warranty (N. Am.) Two years (drivers - parts & labor)


1 customer reviews

Average rating
(based on 1 reviews)
  1. Excellemt

    By Srinivasan October 15, 2014

    Looks very good

Write Your Own Review

Only registered users can write reviews. Please, log in or register